NitroPlanes has the AT-6 Texan in different sizes and color schemes, for engine or motor power.
The rc AT-6 seen above from NitroPlanes wingspan is 82" with a 52" long fuselage. Construction is a glass fiber fuse and center wing
section with balsa covered built up wood wings. It comes in two color schemes. A 1.60 two stroke is the recommended engine. All up weight is around 12 lbs.
The rc AT-6 built from a kit by House of Balsa. It has a wingspan of 35" with a length of 24". Power can come from a 400 size outrunner motor. Weight will be around 2 lbs.
Nick Ziroli Plans rc AT-6.
The great looking rc AT-6 from Nick Ziroli Plans. Either plans or a short kit are for sale. It has a wingspan of 101" and a length of 70". Recommended engines are from 3.0 to 4.2.
RC AT-6 from Top Flite.
The nice looking rc AT-6 from Top Flite. It features all wood construction and retracts. Wingspan is 69" and length is 51".
Weight should be around 9 1/2 lbs. You can power the AT-6 Texan with a .61 two cycle engine or from .70 to .91 four cycle engines.
NitroPlanes 35" w/s rc AT-6.
The rc AT-6 Texan for sale from NitroPlanes. It has a 35" wingspan and is 27" long. Power is from a Speed 370 type motor.
RBC Kits has a rc AT-6. It has a wingspan of 49.5". All balsa construction is used throughout. Recommended power is a Typhoon 29/12/10 or 15/10 motor.
AMA Plans Service has two plans for the rc AT-6. Both are scale models. The 30" AT-6 Texan is made for electric motors. The 44" AT-6 Texan is made for gas power.
RC Royal has plans for the rc AT-6 with a wingspan of 73" and a length of 49.5". It needs a 1.20 four stroke engine and weighs around 8 1/2 lbs.
Brian Taylor will sell you their plans for the rc AT-6. It has a 94.5" wingspan. For power you will need 1.2 to 1.5 four cycle engines.
Aeroshell's rc AT-6 features a fiberglass fuselage. Wingspan is 61.5" and length is 44.5". Engines can be .40 to .46 two stroke or .52 - .70 four stroke.
Precision Cut Kits rc AT-6 is from Don Smith Plans. Wingspan is 84" and length is 55". Engines can be from 1.2 to 1.8 size.
Hangar 9's rc AT-6 has a wingspan of 67 1/2", a 48" length and a all up weight of around 8 lbs. Two cycle engines
suggested are from .60 to .90. You can use from .82 to l.0 four cycle engines.
Ace Simple Series has a rc AT-6. The wing is foam and the tail is balsa. Wingspan is 35" and length is 25". If you want engine power, Ace recommends powering the rc AT-6 with from
.049 to .075 engines. If you prefer to power the rc AT-6 electrically, Ace says that you can use AP-29 or Speed 480 motors.
The Watt-Age rc AT-6 comes with a 36.5" wingspan. Its length is 25.5" Motors can be from 380 to 480.
AirBorne Models has a rc AT-6 with a wingspan of 44" and a length of 31 1/2". The balsa and plywood model weighs around 31 oz. ready to fly and includes a KM 0283010 motor and pilot figure.
AirBorne Models also has a large rc AT-6. Its wingspan is 72", length is 55 1/2", and weight is around 8 1/2 lbs. It needs a .91 4C engine for power.
Lanyu's rc AT-6 is a ready to fly scale model that has a wingspan of 35", a length of 27", and a weight of about 17 oz.
The World Models electric powered rc AT-6 has a wingspan of 44" and a length of 31 1/2". Construction is from balsawood and plywood. Retracts are included. It needs Speed 400 to 600 size motors.
ESM has a rc AT-6. It has 61" wingspan, a glass fuselage and balsawood sheeted wings. You will need from .40 to .52 2C engine power.
Larry Benson built a rc AT-6 with a wingspan of 80". He powers it with a Zenoah G62 engine.
Bill George has a rc AT-6 with a 82" wingspan and a weight of 29 lbs. It has working flaps and a detailed scale cockpit. Power comes from a Sachs 4.2 engine.
Mark Stonemann built a rc AT-6. Its wingspan is 81". Mark uses a Lazer 360 engine and 22 x 10 propeller up front.
James Mapps has a rc AT-6 with a 85" wingspan. It weighs around 27 lbs. and uses a G62 engine.
Karl Ameron built a 65" wingspan rc AT-6. A Saito .91 engine propels the 12 lb. scale model airplane.
Kevin Lawless rc AT-6 wingspan is 120" and weight is about 54 lbs. Power comes from a Mackay 215 cc engine.
Robert Raynoso built a rc AT-6 with a 10 foot wingspan powered by a 5 cid engine. Weight is around 47 lbs.
Curt Davis rc AT-6 has a 102" wingspan. Weight is 33 lbs. and power is by a G62 engine.
Do you have a favorite rc AT-6? Please email us about it.
RC AT-6
